Welcome to Acoustic Frontiers Blog

Creating a system you love shouldn't be difficult. The Acoustic Frontiers blog is here to help.

Adding a Home Theater Riser to an Enthusiast's Room

by Nyal Mellor August 23, 2016

Adding a Home Theater Riser to an Enthusiast's Room

Client Profile

Mr. Ang was one of the first enthusiasts who Acoustic Frontiers designed and created a home theater for. A case study on his project can be found here: AN ENTHUSIAST’S FIRST DEDICATED HOME THEATER ROOM.


Project Overview

Creating a home theater riser and installing "proper" home theater recliners has been high on Mr. Ang's list for many years. Of course when the time came Mr. Ang contacted Acoustic Frontiers for the design.


Acoustic Frontiers Solutions

We supplied home theater riser construction level documentation to allow a third party carpenter to construct a riser for Mr. Ang.

Our typical design documentation for most aspects of home theater design is schematic in nature. We do, however, create much more detailed construction level documents - or blueprints - for key parts of the theater, including sound isolation, screen / baffle walls, risers, HVAC supply / return mufflers, etc.

Most contractors do not have the specific experience of how to construct these elements, and as they are so critical to the final performance of the theater, it is imperative that they are designed properly.

Screen / baffle walls are perhaps the most complex to design, as they need to hold speakers and screen in the right position whilst providing a good acoustical environment.

For home theater risers, the key things are to create a structure that does not resonate, buzz or rattle. The air volume inside risers can also be used to provide additional bass trapping. This is typically done adding cutouts in the riser for "venting". These vents are normally covered with a HVAC register with black acoustical fabric on the bottom of it.

The high volume to open surface area ratio naturally acts as a low pass filter, providing absorption in the lowest frequencies only. The percentage open area must be calculated, as must the internal volume, and the number and placement of vents engineered to create the desired low frequency bass trapping effect. Just cutting a few vents in here and there will not turn your riser into a bass trap, there is some definite engineering that needs to take place here!

Home Theater Riser


Example of a construction level piece of documentation, in this case the framing plan for a riser.

GET THE RESULTS YOU'RE LOOKING FOR WITH ACOUSTIC FRONTIERS

  • You'll have a system you love.
  • You'll experience audio-video like never before.
  • You'll have no doubt you got the best performing system for your budget.

REQUEST A QUOTE


The Results

The riser was constructed by a contractor that Mr. Ang found locally. The riser was covered in carpet and included step lighting. The seats used were Elite's home theater recliners.

Riser Framing Plan


Home Theater Riser

Home Theater Riser

GET THE RESULTS YOU'RE LOOKING FOR WITH ACOUSTIC FRONTIERS

  • You'll have a system you love.
  • You'll experience audio-video like never before.
  • You'll have no doubt you got the best performing system for your budget.

REQUEST A QUOTE




Nyal Mellor
Nyal Mellor

Author



Also in Blog Articles

January 2024 Newsletter

by Nyal Mellor January 20, 2024 0 Comments

Dreaming of a home theater but think you lack space? Think again. In this month's newsletter, we present a client's story who faced the challenge of not having a designated space for a home theater.  While considering converting the garage, the plan proved more challenging than anticipated due to complexities in obtaining building permits. The project encountered exceptional challenges that required unprecedented solutions.

Continue Reading

Another AVS HTotM! Reimagining Home Theaters in Small Spaces
Another AVS HTotM! Reimagining Home Theaters in Small Spaces

by Nyal Mellor January 19, 2024 0 Comments

Discover how Acoustic Frontiers transformed a small space into a high-performance home theater and another AVS Forum Home Theater of The Month. Unique challenges and innovative solutions deliver an immersive audio-video experience.

Continue Reading

AVS Forum Home Theater Projects....22+ with 6 Home Theater of the Month Awards
AVS Forum Home Theater Projects....22+ with 6 Home Theater of the Month Awards

by Nyal Mellor November 29, 2023 0 Comments

Here's the list of all the AVS Forum home theater projects we have helped design (in no particular order. Last update 11/29/23.

Continue Reading

Contact Us About This Product

video-design

Nyal Mellor, Founder, Acoustic Frontiers

  • (415) 524-8741
  • Serving USA & Canada
  • Fairfax, Northern California, USA

ask us a question about this product