Primacoustic MaxTrap

The Primacoustic MaxTrap is a high performance corner mount bass trap.

The Primacoustic MaxTrap is a combination full range absorber and diaphragmatic resonator designed to control all frequencies right down to the deepest bass. This is achieved by combining a full-size high density fiberglass panel with a closed air space behind created by the wood frame to absorb sound below 100Hz. Lower frequencies pass through the front face and then cause the internal diaphragm to resonate. The greater energy contained in low frequencies causes the limp-mass diaphragm to naturally migrate to the frequencies where room resonance is most prominent, thereby reducing the effect of powerful room modes.

Specifications:

• Black melamine laminated MDF frame
• Suspended diaphramatic aborber made from mineral loaded vinyl
• 3" thick front panel made of the same industry standard 6 pounds per square foot (pcf) compressed fiberglass as used in the Primacoustic Broadway panels. Panel has resin hardened edges for a smart, robust finish, is wrapped in a micromesh tissue layer to prevent stray fibers and is covered in an acoustically transparent beige, grey or black fabric
• Closed air space behind the panel further enhances absorption
• Tested in Riverbank Acoustical Laboratories
• Ships flat for quick home assembly; assembles in 15 minutes using common household tools

Use the Primacoustic FullTrap if you need a wall rather than corner mount bass trap.